|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Bulletin I2120 rev. A 07/97 SAFEIR Series 10ETS.. INPUT RECTIFIER DIODE Description/Features The 10ETS.. rectifier SAFEIR series has been optimized for very low forward voltage drop, with moderate leakage. The glass passivation technology used has reliable operation up to 150C junction temperature. The High Reverse Voltage range available allows design of input stage primary rectification with Outstanding Voltage Surge capability. Typical applications are in input rectification and these products are designed to be used with International Rectifier Switches and Output Rectifiers which are available in identical package outlines. VF < 1.1V @ 10A IFSM = 200A VRRM 800 to 1600V Output Current in Typical Applications Applications Capacitive input filter TA = 55C, TJ = 125C common heatsink of 1C/ W Single-phase Bridge Three-phase Bridge Units 12.0 16.0 A Major Ratings and Characteristics Characteristics IF(AV) Sinusoidal waveform VRRM IFSM VF TJ @ 10 A, TJ = 25C Package Outline Units A V A V C 10ETS.. 10 800 to 1600 200 1.1 - 40 to 150 TO-220AC Also available in D-pak (8EWS Series) 1 10ETS.. SAFEIR Series Bulletin I2120 rev. A 07/97 Voltage Ratings Part Number VRRM , maximum peak reverse voltage V 10ETS08 10ETS12 10ETS16 800 1200 1600 VRSM , maximum non repetitive peak reverse voltage V 900 1300 1700 I RRM 150C mA 0.5 Provide terminal coating for voltages above 1200V Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IFSM I2t Max. Peak One Cycle Non-Repetitive Surge Current Max. I2 t for fusing 10ETS.. 10 170 Units A A Conditions @ TC = 105 C, 180 conduction half sine wave 10ms Sine pulse, rated VRRMapplied 10ms Sine pulse, no voltage reapplied 200 130 145 A2s A s 2 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied t = 0.1 to 10ms, no voltage reapplied I t 2 Max. I t for fusing 2 1450 Electrical Specifications Parameters V FM Max. Forward Voltage Drop rt Forward slope resistance 10ETS.. 1.1 20 0.82 0.05 0.50 Units V m V mA Conditions @ 10A, TJ = 25C TJ = 150C TJ = 25 C TJ = 150 C VF(TO) Threshold voltage I RM Max. Reverse Leakage Current VR = rated VRRM Thermal-Mechanical Specifications Parameters TJ T stg Max. Junction Temperature Range Max. Storage Temperature Range 10ETS.. - 40 to 150 - 40 to 150 2.5 62 0.5 2(0.07) Min. Max. 6 (5) 12 (10) Units C C C/W C/W C/W g (oz.) Kg-cm (Ibf-in) Conditions R thJC Max. Thermal Resistance Junction to Case R thJA Max. Thermal Resistance Junction to Ambient R thCS Typical Thermal Resistance, Case to Heatsink wt T Approximate Weight Mounting Torque Case Style DC operation Mounting surface , smooth and greased TO-220AC 2 10ETS.. SAFEIR Series Bulletin I2120 rev. A 07/97 Maximum Allowable Case Temperature (C) 150 140 130 Conduction Angle Maximum Allowable Case Temperat ure (C) 150 140 130 Conduction Period 10ETS.. Series R thJC(DC) = 2.5 C/W 10ETS.. Series R thJC(DC) = 2.5 C/W 120 110 100 90 80 0 2 4 6 8 10 12 Average Forward Current (A) 30 60 90 120 110 100 90 0 2 4 6 8 10 12 14 16 18 Average Forward Current (A) 30 60 90 120 180 DC 120 180 Fig. 1 - Current Rating Characteristics Maximum Average Forward Power Loss (W) 16 14 12 10 RMS Limit 8 6 4 2 0 0 2 4 6 8 10 Average Forward Current (A) Conduction Angle Fig. 2 - Current Rating Characteristics 20 18 16 14 12 10 8 6 4 2 0 0 2 4 6 8 10 12 14 16 Average Forward Current (A) RMS Limit Conduction Period 180 120 90 60 30 Maximum Average Forward Power Loss (W) DC 180 120 90 60 30 10ETS.. Series T J = 150C 10ETS.. Series T = 150C J Fig. 3 - Forward Power Loss Characteristics Peak Half Sine Wave Forward Current (A) 200 180 160 140 120 100 80 60 40 1 10 100 Number Of Equal Amplitude Half Cycle Current Pulses (N) Fig. 4 - Forward Power Loss Characteristics 240 220 200 180 160 140 120 100 80 60 40 0.01 10ETS.. Series Peak Half Sine Wave Forward Current (A) At Any Rated Load Condition And With Rated V RRM Applied Following Surge. Initial T J = 150C Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial T J = 150 C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s No Voltage Reapplied Rated VRRM Reapplied 10ETS.. Series 0.1 Pulse Train Duration (s) 1 Fig. 5 - Maximum Non-Repetitive Surge Current Fig. 6 - Maximum Non-Repetitive Surge Current 3 10ETS.. SAFEIR Series Bulletin I2120 rev. A 07/97 100 Instantaneous Forward Current (A) T J= 25C T J= 150C 10 10ETS.. Series 1 0 0.5 1 1.5 2 2.5 3 Instantaneous Forward Voltage (V) Fig. 8 - Forward Voltage Drop Characteristics Transient Thermal Impedance Z thJC (C/W) 10 D= D= D= D= D= 0.50 0.33 0.25 0.17 0.08 Steady State Value (DC Operation) 1 Single Pulse 10ETS.. Series 0.1 0.0001 0.001 0.01 0.1 1 10 Square Wave Pulse Duration (s) Fig. 9 - Thermal Impedance ZthJC Characteristics 4 10ETS.. SAFEIR Series Bulletin I2120 rev. A 07/97 Ordering Information Table Device Code 10 E T S 16 BASE CATHODE 1 1 2 3 4 5 - 2 3 4 5 2 Current Rating Circuit Configuration: E = Single Diode Package: T = TO-220AC Type of Silicon: S = Standard Recovery Rectifier Voltage code: Code x 100 = VRRM 08 = 800V 12 = 1200V 16 = 1600V 1 CATHODE 3 ANODE Outline Table 10.54 (0.41) MAX. 3.78 (0.15) 3.54 (0.14) 2.92 (0.11) 2.54 (0.10) TERM 2 1 3 DIA. 6.48 (0.25) 6.23 (0.24) 1.32 (0.05) 1.22 (0.05) 15.24 (0.60) 14.84 (0.58) 2 14.09 (0.55) 13.47 (0.53) 3.96 (0.16) 3.55 (0.14) 2.04 (0.080) MAX. 0.10 (0.004) 1.40 (0.05) 1.15 (0.04) 0.94 (0.04) 0.69 (0.03) 2.89 (0.11) 2.84 (0.10) 1 4.57 (0.18) 4.32 (0.17) 3 0.61 (0.02) MAX. 5.08 (0.20) REF. Dimensions in millimeters and inches 5 |
Price & Availability of 10ETS16 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |